Why the Scheppach Saw motor does not start?
The Scheppach Saw motor may not start due to no power, a defective switch or capacitor, or a defective extension cord. Check the mains fuse, have the electrician check the switch, or unplug, check, and replace the extension cord if necessary.
General| Idle speed | - RPM |
|---|---|
| Cutting height @ 45° | 49 mm |
| Cutting height @ 90° | 83 mm |
| Product color | Blue, Stainless steel |
| Placement supported | Freestanding |
| Input power | 2000 W |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Saw blade type | Single |
| Number of teeth | 24 |
| Saw blade included | Yes |
| Number of saw blades | 1 |
Weight and Dimensions| Depth | 1690 mm |
|---|---|
| Width | 615 mm |
| Height | 1055 mm |
| Weight | 48600 g |
| Table depth | 800 mm |
| Table width | 550 mm |
| Blade diameter | 315 mm |
| Base plate width | 400 mm |
| Blade diameter (min) | 20 mm |
To Next Page
