Scheppach PL55 Translation From The Original Instruction Manual

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
22
|
GB
Description of the symbols
The use of symbols in this handbook is designed to direct your attention to possible risks. You must make sure that you
understand the safety symbols and explanations accompanying them. Warnings themselves cannot remove risks and
cannot substitute correct action for the prevention of accidents.
Read instruction manual and safety instructions before starting up and pay attention!
Wear ear protection!
Wear a dust mask!
Wear safety goggles!

m ATTENTION!
In this operating manual, we have used this sign to mark all sections that concern your
safety.

Scheppach PL55 Specifications

General

Power	1200 W
Blade Diameter	160 mm
No-load Speed	5500 rpm
Cutting Depth at 90°	55 mm
Cutting Depth at 45°	41 mm
Bore Diameter	20 mm