www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
19
• -
machine and have been informed about the dan-
•
spare parts and original tools from the producer.
•
be a case of misuse. The user/operator and not
• Please note that our equipment has not been de-
signed for use in commercial, trade or industri-
equipment is used in commercial, trade or indus-
trial businesses or for equivalent purposes.
Residual risks
-
tended purpose! Even when the equipment is used
as prescribed it is still impossible to eliminate cer-
arise in connection with the machine‘s construction
• Contact with the grinding wheel where it is not-
covered.
• Catapulting of parts from out of damaged grind-
ing wheels.
• Catapulting of workpieces and parts of workpiec-
es.
•
used.
• Lung damage if no suitable protective dust mask
is used.
•
the equipment is used over a prolonged period or
• The use of incorrect or damaged mains cables can
lead to electrical injuries.
• Although having regarded all considerable rules
-
ards.
• -
-
ized” and in the entire operating manual.
5. Safety instructions
General power tool safety warnings
m WARNING!
Read all safety warnings, instructions, illustra-
tions and specications provided with this power
tool.
-
Save all warnings and instructions for future ref-
erence.
-
ated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive at-
mospheres, such as in the presence of am-
mable liquids, gases or dust. Power tools cre-
c) Keep children and bystanders away while op-
erating a power tool.
to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk of
c) Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the pow-
er tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduc-
es the risk of electric shock.
3. Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or medi-
cation. A moment of inattention while operating
b) Use personal protective equipment. Always
wear eye protection. Protective equipment such
or hearing protection used for appropriate condi-
tions will reduce personal injuries.
To Next Page
Loading...
Need help?
General
