Schiller AT-2plus - Automatic Mode (ECG) Settings

Page 1.14
SCHILLER AT-2plus 6-Channel ECG Unit
SERVICE HANDBOOK Issue 1 June 1998
Chapter 1
Operating Elements
Settings (cont.)
Interpretation settings: N/A:+/- normal/abnormal is written (+) or suppressed (-)
U:+/- unconfirmed report is written (+) or suppressed (-)
A30:+/- patient age is assumed to be < 30 (-) or >30 (+)
S: +/- low (-) or high (+) sensitivity
For AT-2plus Memory only:
Automatic Save Enabled (+) or Suppressed (-)
Automatic Erase Enabled (+) or Suppressed (-)
Baud Data transmission speed (9600 - 115200 bit/s, see page 1.25)
Com-Type Communication mode, Line or Modem (see page 1.25)
Default Settings
To reset the unit to the basic default settings, proceed as follows:
ALT - 0 - 6 - 6