To Next PageTo Next Page
Need help?Do you have a question about the Schiller AT-2 and is the answer not in the manual?
General| Brand | Schiller |
|---|---|
| Model | AT-2 |
| Category | Medical Equipment |
| Language | English |
Information about the reliability and correctness of the manual's content.
Lists registered trademarks of SCHILLER AG and other owners.
States copyright ownership and reproduction restrictions.
Details the warranty period and conditions for the SCHILLER AT-2.
Provides an overview of the AT-2 ECG recorder and its features.
Describes the unit's location requirements and power supply details.
Details the function and layout of the AT-2 control keyboard.
Concise step-by-step instructions for operating the AT-2.
Explains the Automatic and Manual recording modes of the AT-2.
Details how to program and use the automatic ECG recording formats.
Explains how to select leads, chart speed, and filters for manual recording.
Describes how to set various parameters like language, filters, and time/date.
Outlines procedures for unit checks, casing, cable, and print head cleaning.
Step-by-step guide for replacing the recording paper roll.
Provides guidance on proper handling and storage of thermal paper.
Introduces the chapter's aim to explain AT-2 electronics and identify faulty modules.
Details the functionality of the main circuit board, including power supply and CPU circuits.
Explains the philosophy of fault finding and the use of diagnostic procedures.
Provides a flowchart for troubleshooting common unit faults.
Outlines steps for a general confidence check of the unit's functionality.
Describes procedures to check the printer's operation and print quality.
Provides an overview of module removal/replacement procedures and necessary precautions.
Lists critical warnings and cautions for handling components and the unit safely.
Describes the physical construction of the AT-2 unit and its components.
Illustrates the exploded view of the base assembly and printer components.
Shows an exploded view of the paper feed mechanism.
Details the prerequisites, tools, and steps for opening the unit's case.
Provides instructions for removing and replacing the top assembly.
Details the removal and replacement of the printer tray and thermal printer.
Outlines the procedure for removing and replacing the main board.
Describes the procedure for removing and replacing the battery pack.
Information on the keyboard as a complete assembly and its part number.
Introduces the chapter on procedures for checking and adjusting service settings.
Lists important safety warnings, cautions, and operating conditions for adjustments.
Lists the proprietary and dedicated test equipment required for adjustments.
Diagram showing adjustment locations (VR1, VR2, VR3) on the main board.
Details the procedure for adjusting and checking the battery charge voltage.
Describes how to check and adjust the paper mark Schmitt trigger sensitivity.
Procedures for adjusting ECG amplifier reference voltages and PWM ramp time.
Explains how to obtain a service printout and interpret ECG reference voltages.
Information on available software options and how to upgrade the unit.
Provides contact details and information required for ordering spare parts.
Lists available spare parts with their descriptions and part numbers.
Lists comprehensive technical specifications of the AT-2 ECG Unit.
Describes the different available configurations of the AT-2 unit.
Explains the purpose of the glossary and its scope.
Provides definitions for important signals and acronyms used in the manual.
