Schlage CYLINDERS - Full Size Interchangeable Core Cylinders for Schlage Locksets; Full Size Core Only; IC Housings for Bored Deadlocks

9
Cylinders for Exit Devices, Aluminum Doors, etc.
Number Description
20-022 Conventional cylinder
20-710 Primus cylinder
20-716 Primus lockout cylinder
20-510 Primus UL437 Listed cylinder
20-516 Primus UL437 Listed lockout cylinder
Rim Cylinders
Available 605, 606, 612, 613, 625 and 626 finish.
Everest C123 keyway standard.
Number Description
26-072 Conventional cylinder only
20-013 Conventional cylinder with 3/8” blocking ring
20-706 Primus cylinder with 3/8” blocking ring
20-510 Primus UL437 Listed cylinder
20-718 Primus lockout cylinder
20-518 Primus UL437 Listed lockout cylinder
Cylinders for Adams Rite MS, 4500 and 4700 Series,
Lori 4500 Series and Corbin Russwin DL3000 Series.
These cylinders include set screw pack B220-050 for Adams Rite locks.
Number Description
26-073 Conventional cylinder only
20-708 Primus cylinder only
20-508 Primus UL437 Listed cylinder only
Cylinders for Adams Rite 4070 Series
B502-292
Cam for Classic
Conventional
B502-944
Cam for Everest
& Primus
B502-945
Cam for Everest
& Primus
B502-380
Cam for Classic
Conventional
Notes 1. Available 605, 606, 612, 613, 625, 626, 629, and 630 finish.
2. To differentiate between Classic and Everest, specify keyway. Example: C or CP (Classic), C123 (Everest).Everest C123 keyway standard.
3. 1-1/8” length standard. Optional lengths available in 1/8” (4mm) increments up to 1-3/4” (44mm).
4. To order less Schlage logo, specify with K510-612 faceplate.
5. Lockout keys must be ordered separately and lockout cylinders will not be master keyed by Schlage.
6. Specify LKB if 0-bitted Primus cylinders are required less key blanks.
CYLINDERS, KEYS AND KEY CONTROL