Schlage Everest - Mechanical Overview of Cylinders

6 • Schlage • Everest full size cylinder service manual
Mechanical overview
Mechanical overview
Shell
Tailpiece
Plug
Check Pin Spring
Check Pin
Retainer Cap
Top pins
Master Pins
(as needed)
Bottom Pins
Key
Tumbler
Springs
Retainer Cap Pin
Retainer Cap Pin Spring
Traditional cylinder (prior to July, 2010)
Everest, Everest 29
and Primus Classic
Traditional cams (prior to April, 2010)
Everest, Everest 29
and Primus Classic
Mortise cylinders use the Primus cam with one screw.
Traditional cylinder (aer July, 2010)
Classic Everest, Everest 29 and Primus
Modular cams (introduced July, 2010)
For cylinder housing sizes
1
Z\v, 1Z\x, 1C\v”
For cylinder housing sizes
1
Z\,, 1C\,, 1B\,”
Modular cylinder cams may be used with Classic, Everest 29, and
Primus key sections. Use appropriate cam for cylinder housing size.
Cylinder cross section
Locked Unlocked