Schlage FE410F - Testing Lock Operations; Bolt and Latch Functionality Tests; External Lever and Bolt Interaction Test; Lock Setup and User Guide

7
8 Test the lock.
8a Extend and then retract the bolt using the inside bolt
throw.
Bolt should extend and
retract smoothly.
L Outside bolt throw should spin freely until a valid credential is
presented.
8b Extend the bolt using the bolt throw and then rotate the
inside lever.
Bolt should retract.
Latch should retract.
8c Rotate the outside lever.
Latch should retract.
If the lock did not operate as described, please see
Troubleshooting on page 8.
9 Set up the lock.
Continue to www.schlage.com to download the Schlage Control
Smart Locks User Guide.