Parts and kits
Schlage • ND-Series service manual • 101
Latches
All ND-Series latches have one-inch diameter housing and adjustable faceplates for flat or beveled doors.
Deadlatch, 13-247
(Replaces 13-047)
Springlatch, 13-248
(Replaces 13-048)
Anti-frIction fire door deadlatch,
14-042
Deadlatch
detail
Special door
preparation
required.
Backset Description Springlatch Deadlatch Rabbeted latch and strike kit, 39-030
2
C\,” Square corner, 1Z\,” x 2Z\v”
— 14-047
Spacer for
latch
Shield for
strike
Square corner, 1” x 2Z\v”
— 14-048
2
C\v” Square corner, 1Z\,” x 2Z\v”,
standard
13-248 13-247
2
C\v”
Anti-friction fire door latch,
square corner, 1
Z\,” x 2Z\v”,
C\v” throw, 1C\,” - 6” door range
— 14-042***
3
C\v” Square corner, 1Z\,” x 2Z\v”
14-010 14-028
5” Backset extension link — 43-005**
— Rabbeted latch and strike kit
(605, 626 only)
39-030*
* Adapts square corner latch and 2
C\v” high square corner strike to Z\x” rabbeted door and frame preparations.
** Can only be used with 2
C\v” backset latch.
*** Used for pairs of fire-rated doors.
Strikes
Square corner T-strike, 10-013 Square corner fire door T-strike, 10-016 ANSI Prep. A115.2, 10-025
Size: 1Z\,” x 2C\v” x C\cx”
Lip length: 1
Z\,”, 1Z\x”
Includes strike box
C603-623
Available in 605, 606,
612, 613, 619, 625,
626.
Size: 1Z\,” x 2C\v” x C\cx”
Lip length: 1
Z\,”, 1Z\x”
Includes strike box
B502-853
Available in 605, 606,
612, 613, 619, 625,
626.
Size: 1Z\v” x 4M\,” x C\cx”
Lip length:
1
C\zn” (std), 1C\,”, 1Z\x”
If required, K510-066
strike must be
ordered separately.
Available in 605, 606,
612, 613, 619, 625,
626.
ANSI PlastIc strike
box, K510-066
To Next Page
Loading...
