Name and function of each part
1.
Front Ass`y
Name Product specication Remark
① Front Ass`y
84mm(W) X 260mm(H) X 21mm(D)
Including rubber
pad
②
Back Ass`y
82mm(W)
X
242mm(H)
X
34mm(D)
③ Back bracket 70mm(W)
X
119.5mm(H)
X
6.6mm(D)
④ Strike 35mm(W) X 106mm(H) X 6.3mm(D)
⑤ Strike housing 21mm(W) X 106mm(H) X 19.5mm(D)
⑥ Mortise lock
105.4mm(W) X 110mm(H) X 25mm(D)
⑦ Card key ISO card, Tag key, Mobile tag key
⑧ Handle shaft 96mm(W) X 8mm(H) X 8mm(D)
⑨ Handle shaft clip 2 EA
⑩ Override key 3 EA
⑪ Battery 1.5V 'AA' Size LR6 Alkaline, 4EA(DC 6V)
⑫ Screws 1 SET
⑬ User manual
Main User manual
⑭ Installation template
Using for making hole at the door
⑮ Communication pack
Communication pack
Optional
⑯ Remote key Remote key Optional
※ Installation condition Door thickness 35~50mm
It facilitates escape with a simple action of lever down.
The product can be installed in a left or right handed
configuration.
If users do not open the door after unlocking the device it will
lock itself automatically.
8 levels of volume.
Door will not emit any sound when mute is activated.
Easy to check battery status with three step level indicator and
alarm when battery replacement is required.
When the door is opened by force an alarm will sound.
After multiple incorrect attempted entries an alarm will sound
and all the functions of the lock will be suspended for three
minutes. The alarm activated after three incorrect PIN/card
entries.
Automatically deleting old PIN code or card key information when
registering new one.
When you enter your home with other people, you may not
want to show PIN code to them. In this case, you may press
any numbers randomly without limitation and then enter your
PIN code at the end.
When the door is closed, it will be locked automatically in auto
lock mode.
① ③②
⑬
⑭
Screws
User
manual
⑫
④ ⑤ ⑥
⑨
⑪⑩
⑧
Installation
template
Factory setting
Item Setting Status Ref.page
Auto/Manual lock mode [Auto-lock] 9
Beep sound level (1~8 level) 8 level 8
Factory setting PIN code 123456 -
USER MANUAL
Notice
Please read this manual before installation and
operation.
Safety precautions
Product features
Product composition and components
Remote keyCommunication pack
Optional parts
⑮ ⑯
⑦
ISO
CARD
Tag
key
M
key
Can open the door by pushing down
it after unlocking with PIN code or
Card key
Indicate operation status and
checking battery capacity
˙
Remaining battery 20%
˙
Remaining battery 50%
˙
Remaining battery 80%
Unlock the door with override
key manually
When battery does not operate,
product may be operated
and unlocked by contacting a
9V battery on terminal located
outside
Touch the registered card key to
unlock the door
Indicate lock / unlock status
When the battery is low, the
red light blinks. Please change
batteries
Disassembling the door lock may damage the product. Damages to
the product caused by unauthorized persons may void the warranty.
Please remove the batteries immediately from the product, if you
do not take this step immediately, the product may suffer severe
damage.
If the product is exposed to water or liquids, please wipe the
moisture off with a soft cloth. If moisture or foreign materials
penetrate the product, remove the batteries immediately.
If leakage is discovered, please wipe out with a dry cloth and replace
with new batteries. In case of exposure to leakage, wash affected
skin area with soap and water immediately.
Such materials may damage the surface of the lock or cause a fire.
Do not use damaged batteries.
It may damage the product or cause a malfunction.
It may damage the product or cause a malfunction.
The battery life is getting shorter and it may cause leaks or
explosion.
Dew condensation; small drops of water that form when warm air
touches a cold surface. Please check the environment of installation
area. Heavy dew condensation may damage the product or cause a
malfunction.
How to apply external power in the emergency
PIN code
C
Card key
To Next Page
Need help?
General
