Schmid SHDSL - Router Types; Figure 2-2: Point-To-Point Ethernet Services; Table 2-1: Watson SHDSL Router Types

Watson SHDSL Router
Operating Manual
Watson-SHDSL-Router-Manual.doc
Version 1.0-03
several customers can be aggregated to a single Ethernet port. Advanced VLAN functions allow for
customer isolation and traffic management. Depending on the distance and the number of wire
pairs available linerate up to 22.8 Mbps are available.
Watson SHDSL router can also be deployed point-to-point as shown in Figure 2-2:
Watson SHDSL router
(SZ.441.V400,
SZ.441.V800)
Watson SHDSL router
(SZ.441.V400,
SZ.441.V800)
SHDSL, 1-4 pairs
Watson SHDSL router
(SZ.441.V400,
SZ.441.V800)
Watson SHDSL router
(SZ.441.V400,
SZ.441.V800)
SHDSL, 1-4 pairs
Figure 2-2: Point-to-point Ethernet Services
For these applications two Watson SHDSL routers are connected back to back with one of the mo-
dems being configured as DSL master and the other one as DSL slave. Depending on the distance
and the number of wire pairs available linerate up to 22.8 Mbps are available. VLAN and MAC Ad-
dress filtering functions allow for traffic management and optimal use of the available DSL band-
width.
Refer to the “Watson Ethernet Application Manual” [2] which described several applications that can
be realized with the Watson SHDSL router.
2.3 Router Types
The following Watson SHDSL routers are available:
Description Order Code
Watson SHDSL Router, 2 pair, 8x Ethernet SZ.441.V400
Watson SHDSL Router, 4 pair, 8x Ethernet SZ.441.V800
Table 2-1: Watson SHDSL Router types
2-2 Revision: 2007-05-24