72 73
english
2. Thread the neckband through the
neckband channel.
3. Push the chinstrap and chinstrap
pad through the opening in the
high-comfort cheek pad.
4. Now pull the loop of the neckband
over the chinstrap and pull the
neckband tight from the back.
5. Push the plastic tongue with round
holes on the head pad over the pin
sewn in to the back of the cheek
pad and fix it in place using the
red plug-in strip.
4. Now pull the chinstrap backwards
out of the cheek pad.
5. Pull the neckband out through the
neckband channel.
6. Separate the chinstrap pad from
the chinstrap by releasing the
button fixing.
7. Repeat steps 2-5 for the second
cheek pad.
Fitting the high-comfort cheek pads
1. Button the chinstrap pad on to the
chinstrap and thread the chinstrap
through the loop on the chinstrap
pad.
C. THE HELMET
english
To Next Page
Loading...
