SC2 Motorcycle Bluetooth
®
Communication System with Mesh Intercom™ | 9
2 INSTALLING THE HEADSET ON YOUR HELMET
2. Pull out the antenna cable retainer from its original position, and pull out the
antenna cables from the upper gap in the space. Then, connect the SC2’s
antenna cables and the helmet’s antenna cables correctly.
Click
Antenna
cable
retainer
3. Put the antenna cable retainer back into its original position, and put the
connected cables into the upper gap in the space.
Note: Make sure that the antenna cable retainer and the connected cables
are positioned correctly before installing the SC2. If not, the cables may be
damaged or interference may occur.
To Next Page
Loading...
