SCHUBERTH SC2 - Using Mesh in Group Mesh; Creating a Group Mesh

SC2 Motorcycle Bluetooth
®
Communication System with Mesh Intercom™ | 28
7 MESH INTERCOM
7.4 Using Mesh in Group Mesh
7.4.1 Creating a Group Mesh
Creating a Group Mesh requires two or more Open Mesh users.
A C
B D
Open Mesh
1. To enter Mesh Grouping to create a Group Mesh, press and hold the
Mesh Intercom Button for 5 seconds on the headset of You (C) and your
friend (D).
C
&
=
D
“Mesh Grouping”
2. The headsets complete Mesh Grouping and automatically switch from
Open Mesh to Group Mesh.
“Group Mesh”
D
C
B
A
Group MeshOpen Mesh
Note:
•
If the Mesh Grouping is not completed within 30 seconds, users will hear
a voice prompt, “Grouping failed”.
•
If you want to cancel during the Mesh Grouping, tap the Mesh Intercom
Button.