SC2 Motorcycle Bluetooth
®
Communication System with Mesh Intercom™ | 30
7 MESH INTERCOM
7.5 Enable/Disable Mic (Default: Enable)
Users can enable/disable the microphone when communicating in a Mesh
Intercom.
=
“Mic on” or “Mic o”
7.6 Toggling Open Mesh/Group Mesh
Users are able to toggle between Open Mesh and Group Mesh without
resetting the Mesh. This allows users to keep the Group Mesh Network
connection information while in Open Mesh.
Users can toggle to Group Mesh to communicate with participants from the
stored Group Mesh Network connection information.
Toggle Between Open Mesh and Group Mesh
“Open Mesh channel #”
Open Mesh
=
“Group Mesh”
Group Mesh
Note: If you have never participated in Group Mesh, you cannot toggle
between Open Mesh and Group Mesh. You will hear a voice prompt, “No
Group Available”.
7.7 Reset Mesh
If a headset in an Open Mesh or Group Mesh resets the Mesh, it will
automatically return to Open Mesh (default: channel 1).
=
“Reset mesh”