washMaster Installation guide
539715.AB Page 17 / 21 07.2019
4 Self-test
The service technician has the opportunity to check the machine and its successful integration
into the network and Internet availability. For this purpose, the service card is inserted into the
card slot in the basic screen.
If the machine was able to establish a connection to the server, the message “Service card: test
OK” is displayed.
If no connection is possible, the message “Service card: test failed” is displayed.
5 Error messages
There are error messages that are displayed in plain text for the user (H messages) and
messages that are coded and intended for the service (F error).
Error messages are displayed on a pop-up screen.
5.1 Error messages F
Error Error messages Cause of error Reaction of the machine
F-50
No connection to
the washMaster
module
defective or cable from the
washMaster module to the
power unit disconnected
The machine cannot establish a connection
to the washMaster module.
As long as the error message is displayed,
no programme can be selected.
F-51
Error in
programming
been given parameters, but a
Connectivity module is
attached.
The machine is identifying a washMaster
module, but it has not been given
parameters.
As long as the error message is displayed,
no programme can be selected.
F-56
Error in
programming
been given parameters, but a
Connectivity module is
attached.
The machine is identifying a washMaster
module, but it has not been given
parameters.
As long as the error message is displayed,
no programme can be selected.
F-62
No connection to
the washMaster
module
defective or cable from the
washMaster module to the
power unit disconnected
The machine cannot establish a connection
to the washMaster module.
As long as the error message is displayed,
no programme can be selected.
To Next Page
Loading...
