washMaster Installation guide
539715.AB Page 4 / 21 07.2019
Status
The status shows how the machine is connected to the network:
The WLAN connection is switched off.
The machine waits for an input or action from the user.
An attempt is made to establish a connection or a link.
The machine is connected to a wired network.
The machine is connected to a WLAN network
The machine is connected to both wired and wireless networks.
No connection available, neither by cable nor with WLAN.
The time for establishing a connection or pairing has been exceeded.
If an error occurs, an error code is displayed. The exact error description can be found in the
table:
Timeout for network
configuration via Bluetooth
Set the network parameters via Bluetooth (Mobile
App).
Timeout for network
configuration via the Web page
Set the network parameters as described under “Web
configuration”.
configuration via WPS
The machine has not received any network
parameters via WPS. Call the WPS function on the
machine and the WiFi router.
Configure WPS again or set the network parameters
via Web configuration.
The network configuration was
aborted by the user
WPS Configuration
This option is currently not available.