82
Inspect and verify if any damages have occurred in shipment. If confirmed, please inform the shipping company at receiving time. Certify
that all damaged parts are replaced and mechanical and electrical problems are corrected before operating the SRS - Compressed Air Dryer.
Dryers are packaged in wooden crates completely covered by semitransparent plastic. Moving the equipment must be done on a forklift or
pallet truck.
SRS - Compressed Air Dryers are used for removing humidity present in compressed air, thereby providing extended useful life to equipment.
To provide complete treatment of generated compressed air, it is important to employ the recommended installation suggested in Illustration
9.1. The maximum operating pressure is displayed on the Identification Tag.
2. INTRODUCTION
3. SRS - AIR DRYER SHIPPING AND RECEIVING INSPECTION
4. APPLICATION
WE RECOMMEND READING THESE INSTRUCTIONS ENTIRELY FOR PROPER OPERATION OF YOUR SCHULZ PRODUCT.
It will help you to increase the performance, enhance safety and guide the operator in preventive maintenance procedures in equipment
operation.
Black numbers in the text, show the key parts and functions - Chapter - Main components and their functions.
If there is any problem that cannot be solved by the information provided in this manual, please contact the nearest Schulz Authorized Dealer.
In order to extend the useful life of this reciprocating piston compressor, the use of mineral lubricant oil and original parts Schulz are highly
recommended.
The pressure vessel quality certificate must be presented to authorities, in case of inspection.
Therefore, keep this instruction manual in a safe place.
Do not transport the equipment by means of hoisting, not matter if packaged or not.
IMPORTANT
Use only original SCHULZ replacement parts for your SRS - Compressed Air Dryer purchased at our Schulz
Authorized-Technical/Distributor staffed with trained and competent professionals in its maintenance and
operation.
IMPORTANT
This Instruction Manual contains important information about the use, installation, maintenance, and safety
procedures for the SRS - Compressed Air Dryer. It must be on hand at all times for the operator. Before
operating this equipment or performing any maintenance, please read these operating instructions fully for complete understanding, as to
avoid personal injury to the operator or damage to the SRS - Compressed Air Dryer and its supplies. The drawings and photographs in this
instruction manual are solely for guidance purposes.
IMPORTANT
Congratulations for purchasing a SCHULZ quality product.
A company certified with quality system and environmental management system.
This product was designed and manufactured according to the existing applicable standards such as: NR10, NR12 (Aspects relating to
product design and manufacture, installation, training and other actions also required to meet the NR12, are the sole responsibility of the
customer), ISO 8573, ISO 7183.
To Next Page
Loading...