Assembly
04.00 | SKE | Assembly- and Operating Manual | en | 389407
19
4.4 Mounting the sensor
NOTE
Observe the assembly and operating manual of the sensor for
mounting and connecting.
The product is equipped for the use of sensors.
• For the exact type designations of suitable sensors, please see
the catalog data sheet.
• For technical data for the suitable sensors, see Assembly and
Operating Manual and catalog data sheet.
– The Assembly and Operating Manual and catalog data sheet
are included in the scope of delivery for the sensors and are
available at schunk.com.
• Information on handling sensors is available at schunk.com or
from SCHUNK contact persons.
To Next Page
Loading...
