EasyManua.ls Logo

SCHUNK SWS 150 - User Manual

Default Icon
72 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Original Operating Manual
Assembly and Operating Manual
SWS 005 – 300
Quick-Change-System

Table of Contents

Questions and Answers

  • Q
    qschroederAug 9, 2025
    Why is the clamping force reducing between the quick-change head and quick change adapter in my SCHUNK Industrial Equipment?
    • T
      Tiffany RobinsonAug 9, 2025
      If the clamping force between the quick-change head and quick change adapter of your SCHUNK Industrial Equipment is reducing, it could be due to several reasons. First, check the sealings to ensure compressed air isn't escaping; replace them if necessary after disassembling the module. Another potential cause is excessive grease in the mechanical movement space, requiring you to clean and lubricate the product. Lastly, verify that the air supply meets the minimum pressure requirements.
  • B
    Brian HatfieldAug 19, 2025
    What to do if SCHUNK SWS 150 Industrial Equipment doesn't clamp the quick-change adapter?
    • J
      John SmithAug 20, 2025
      If your SCHUNK Industrial Equipment doesn't clamp the quick-change adapter, it might be due to a few reasons. Start by checking for dirt deposits between the SWK and SWA; if present, disassemble and clean the product. Also, ensure that the air supply meets the minimum pressure requirements. Lastly, verify the evenness of the mounting surface.
  • W
    Wendy WashingtonAug 30, 2025
    How to troubleshoot if balls don’t move in SCHUNK SWS 150 Industrial Equipment?
    • M
      mcdonaldbrittanyAug 30, 2025
      If the balls in your SCHUNK Industrial Equipment aren't moving, it could be due to a few reasons. First, verify that the air supply meets the minimum pressure requirements. Also, check the compressed air lines to ensure they are correctly connected. Finally, inspect the proximity switch for defects or incorrect settings; readjust or replace the sensor as needed.

Summary

2 Basic safety notes

2.1 Intended use

Defines the proper applications and use cases for the product.

2.2 Not intended use

2.6 Personnel qualification

2.7 Personal protective equipment

Specifies necessary personal protective equipment for safe operation.

2.8 Notes on safe operation

Provides essential guidelines for safe handling and product operation.

2.12 Fundamental dangers

Details general dangers, including handling, commissioning, operation, and movements.

2.13 Notes on particular risks

Highlights specific risks and necessary precautions to avoid injury or damage.

4 Product Overview

4.1 Quick-change head (SWK)

4.2 Quick-change adapter (SWA)

5 Assembly

5.1 Example of mounting

5.2 Interface Plate Design and Mounting

5.4 Mechanical connection

Provides instructions for the mechanical connection and fastening of components.

5.5 Pneumatic connection

Details on pneumatic connections and air supply requirements.

5.8 Sensors - Piston Stroke Control

6 Operation

6.1 Conditions for Coupling

Details the necessary conditions and steps for coupling the SWK and SWA.

6.2 Fail-Safe Operation

Explains fail-safe operation and precautions during air pressure loss.

6.3 Conditions for Uncoupling

Details the necessary conditions and steps for uncoupling the SWK and SWA.

7 Trouble shooting

7.1 Quick-change head (balls) doesnt move

7.2 Quick-change head doesnt clamp the quick-change adapter correctly

7.3 Clamping force between quick-change head and quick-change adapter is reducing

8 Maintenance and Care

8.1 Preventive Maintenance

Outlines a schedule for preventive maintenance and visual inspections.

8.2 Lubrication

Details external and internal lubrication procedures and recommendations.

8.4 Service of the sensors

8.7 Disassembly of the SWK Quick-change head

SCHUNK SWS 150 Specifications

General IconGeneral
BrandSCHUNK
ModelSWS 150
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals