Product Overview
10.00 | SWS 005 – 300 | Assembly and Operating Manual | en | 389456
21
4.2 Quick-change adapter (SWA)
A mounting pattern is machined into the quick-change head (SWA)
for mounting to a customer tooling or a tooling interface plate.
Ports for
air feed through
Alignment pin
bushing (2x)
Bearing race
Proximity sensor
target (RTL)
SWA
4.3 Optional modules
There are flats available for mounting of the optional modules for
support of various utility pass-through, such as signal, fluid/air,
and electric.
SCHUNK website gives assistance in choosing the right modules.
For information about which optional modules can be used with
the appropriate product version, see catalog.
To Next Page
Loading...
