SCHUNK SWS 150 - 5.5 Pneumatic connection

Assembly
10.00 | SWS 005 – 300 | Assembly and Operating Manual | en | 389456
31
Size 160
Type of Screw Thread Size Strength Class Tightening
Torque [Nm]
Thread Locker
Robot-side adapter plate on SWK
Socket head cap M10 12.9 75 Loctite 242
Tool-side adapter plate on SWA
Socket head cap M10 12.9 52 Loctite 242
Size 300
Type of Screw Thread Size Strength Class Tightening
Torque [Nm]
Thread Locker
Robot-side adapter plate on SWK
Socket head cap M12 12.9 120 Loctite 242
Tool-side adapter plate on SWA
Socket head cap M12 12.9 95 Loctite 242
5.5 Pneumatic connection
WARNING
Risk of injury due to unexpected movements!
If the power supply is switched on or residual energy remains in
the system, components can move unexpectedly and cause
serious injuries.
• Before starting any work on the product: Switch off the power
supply and secure against restarting.
• Make sure, that no residual energy remains in the system.
NOTICE
Observe the requirements for the air supply
Technical Data [
}
18].
Size SWS 005 007 011 020 021 022 027 040 040
Q
Connection
L (A) locked,
U (B) unlocked
M5 M5 M5 M5 M5 M5 G
1/8"
G
1/8"
G
1/8"
Size SWS 041 046 060 071 076 110 150 160 300
Connection
L (A) locked,
U (B) unlocked
G
1/8"
G
1/8"
G
1/8"
G
1/8"
G
1/8"
G
1/8"
G
1/8"
G
1/8"
G
1/4"
The air feed throughs for the SWA are marked on the SWK.