SCHUNK SWS 150 - 2.13 Notes on particular risks

Basic safety notes
16
10.00 | SWS 005 – 300 | Assembly and Operating Manual | en | 389456
2.13 Notes on particular risks
WARNING
Risk of injury from objects falling and being ejected!
Falling and ejected objects during operation can lead to serious
injury or death.
• Take appropriate protective measures to secure the danger
zone.
WARNING
Risk of injury due to unexpected movement of the machine/
system!
• Switch off the energy supply.
WARNING
Remove all temporary protective materials (caps, plugs, tape,
etc.) on locking face of Tool Changer and modules prior to
operation. Failure to do so will result in damage to Tool
Changers, modules, and end-of-arm tooling and could cause
injury to personnel.
WARNING
Injury or equipment damage can occur with power or air on.
• Do not perform maintenance or repair on Tool Changer or
modules with power or air on.
• Turn off power and air before performing maintenance or
repair on Tool Changer or modules.