Basic safety notes
10.00 | SWS 005 – 300 | Assembly and Operating Manual | en | 389456
17
WARNING
During operation, the area between the Quick-Chance-Head
SWK and Quick Change Adapter SWA must be kept clear.
Failure to keep area clear will result in damage to Tool Changer,
modules , or end-of-arm tooling and could cause injury to
personnel.
WARNING
Using the Tool Changer in applications other than intended will
result in damage to Tool Changer, modules, or end-of-arm
tooling and could cause injury to personnel.
• The Tool Changer is only to be used for intended applications
and applications approved by the manufacturer.
CAUTION
The SWK locking mechanism must not be actuated without
being mounted to the robot interface plate.
Damage to the Cover Plate and O-ring may result.
• Always attach the SWK to the Robot interface plate prior to
attempting any operations.
To Next Page
Loading...
