Schwing SC30 - Page 25

5.2-25
005.050.01-EN
11.2 RECEIVER
The receiver is generally installed near the boom column of the machine.
The receiver display is only intended for function checking purposes during maintenance op-
erations. Reading the messages on this display during the working operations is not permit-
ted and not necessary.
WARNING
Risk of falling
Access to the truck-mounted concrete pump in operation is forbidden.
If it should be necessary to step on the machine for servicing purposes of the
radio control system, this is only permitted after the pump drive has been shut
off. For working on the pump, the machine must be equipped with safe access
ladders and fall protection systems.
See the SAFETY MANUAL of the machine.