Schwing VECTOR User Manual

Service Manual
VECTOR CONTROLLER-SERVICE MANUAL 29
Acknowledging several faults
Switching off the control system
If you switch off electrical control to the system, any
existing faults will be stored to memory.
Any fault will be re-detected and reported again when
the diagnostic system is restarted.
ACKNOWLEDGING SEVERAL FAULTS
If several messages are existing, a
symbol appears in the lower right-
hand corner of the display:
–
Acknowledge the first message
as usual.
The next message appears and
the buzzer sounds.
–
Acknowledge this as well as any
following message until no further
message is displayed.

Schwing VECTOR Specifications

General

Brand	Schwing
Model	VECTOR
Category	Control Systems
Language	English