3
34
If necessary, adjust the seat height and angle so the
rider is comfortable and has complete control.
Tools: 14mm open and box end wrench, Adjustable
Pliers
1. Release the quick release seat clamp.
2. Adjust the height of the seat until the rider feels they
have control of the tricycle and are comfortable.
3. Lock the quick release seat clamp.
Adjust the Seat
Failure to insert the handlebar and seat stems beyond
the “Minimum Insertion” line may cause the stem to
break resulting in damage to the stem, loss of control,
falling, serious injury or death. Insert the handlebar and
seat stem into the frame until the Minimum Insertion
Mark is not visible.
!
WARNING!
1
2
Minimum
insertion mark
To Next Page
Loading...
