SciCan STATMATIC smart 2 - English; Default Chapter; Table of Contents

Table of Contents
Page 2
STATMATIC smart 1,2,3 EN
1 Important Information .................................................. 3
Type description .......................................................... 3
Scope of delivery ........................................................ 3
General ....................................................................... 3
Intended use ............................................................... 4
Disposal ...................................................................... 4
Qualifications of the operator ...................................... 5
Safety Notes SciCan "Dental Oil" and SciCan
"Cleaner" ..................................................................... 5
Used symbols ............................................................. 5
Disclaimer ................................................................... 6
Device overview .......................................................... 7
2 Commissioning ........................................................... 9
Environmental conditions ............................................ 9
Electrical Requirements .............................................. 9
Media connections ...................................................... 9
Filling the media system ............................................10
Setting the language ..................................................10
Setting the date/time ..................................................11
Assemble and check the adapter ...............................11
Functional testing of flow rate using the testing
adapter .......................................................................11
3 Operation ...................................................................12
Manual pre-cleaning of instruments ...........................12
"Cleaning + Maintenance" program - for regular and
contra-angle handpieces and turbines .......................12
"Collet care" program .................................................12
"Maintenance only" program - for regular and
contra-angle handpieces and turbines .......................13
"Clean only" program - for regular and contra-angle
handpieces and turbines ............................................13
"Special instrument" program .................................... 15
4 Maintenance .............................................................. 16
Checking adapter fixation .......................................... 16
Checking the O-rings ................................................. 16
Functional testing of flow rate using the testing
adapter ...................................................................... 16
Changing the adapter ................................................ 16
Refilling of the media containers ............................... 17
Replacing the absorption pads .................................. 18
Empty the collecting tray ........................................... 18
Inside cleaning and disinfection of the maintenance
area ........................................................................... 18
Outside cleaning and outside disinfection of the
device ........................................................................ 18
Recommendation ...................................................... 18
Note for users in countries with a legal validation
requirement ............................................................... 18
Data backup of the log file ......................................... 19
Deletion of the log file on the STATMATIC smart ...... 19
Emptying the media system ...................................... 19
Warning message: Servicing required soon .............. 20
Error message: Servicing required ............................ 20
Transport ................................................................... 20
5 Troubleshooting ......................................................... 21
Replacing fuses ......................................................... 22
6 Information on Electromagnetic Compatibility (EMC) 23
7 Accessories ............................................................... 25
8 Technical Data .......................................................... 26
Type plate .................................................................. 27
9 Documentation, Log File............................................ 28
10 Guarantee ................................................................. 29
STATMATIC PLUS is a trademark; OPTIM and STATIM are registered
trademarks of SciCan Ltd. All other trademarks referred to in this manual are the
property of their respective owners.
SciCan GmbH
Wangener Strasse 78
88299 Leutkirch, GERMANY
Phone:
+49-7561-98343-0
Fax:
+49-7561-98343-699
SciCan Ltd.
1440 Don Mills Road
Toronto, ON M3B 3P9, CANADA
Phone:
+1-416-445-1600
Fax:
+1-416-445-2727
Toll free:
+1-800-667-7733
E-mail:
techservice.ca@scican.com
SciCan Medtech AG
Manufactured by:
Alpenstrasse 14
6300 Zug, SWITZERLAND
SycoTec GmbH & Co. KG
Phone:
+41-41-727-70-27
Wangener Strasse 78
Fax:
+41-41-727-70-29
88299 Leutkirch
SciCan Inc.
GERMANY
701 Technology Drive
Phone:
+49 7561 86-0
Canonsburg, PA 15317, USA
Fax:
+49 7561 86-266
Phone:
+1-724-820-1600
Fax:
+1-724-820-1479