21
STORE TIME_STAMP_ENABLE N↵
N=0 Disables time stamping of weight data. N=1 Enables time stamping of weight data.
Note the single space between STORE and TIME_STAMP_ENABLE and a single space before N.
STORE STABILITY_INDICATOR_ENABLE N↵
N=0 Turns the stability indicator off. N=1 Turns the stability indicator on.
Note the single space between STORE and STABILITY_INDICATOR_ENABLE and a single space before N.
STORE START_OPTION N↵
N = 0 Requires the ON/OFF button to be pressed to turn on
N = 1 Starts up as soon as power is applied. Balance does self test and then goes into normal weighing.
N = 2 Starts up as soon as power is applied. Bypasses self test and goes idirectly into normal weighing.
Note the single space between STORE and START_OPTION and a single space before N.
SETCLOCK MM/DD/YY HH:MM:SS↵
Sets the real time clock to the date and time entered. The RTC is battery powered and will keep time for
months without external power.
Note the single space between SETCLOCK and MM/DD/YY and HH:MM:SS.
STORE AUTO_SEND_INTERVAL S↵
S = Number of seconds between output
Note the single space between STORE and AUTO_SEND_INTERVAL and a single space before S.
1. Not all balances may have this unit of weight available.
2. For a custom unit of weight please contact Scientech customer support.
3. N = number of samples collected, XX.XXX = weight value added to stack, U = unit of weight.
4. Target weight should be entered in the precision displayed by the balance.
To Next Page
Loading...
