Power and Environmental Characteristics
Power Requirements and Frequency
100 to 132 VAC
RMS
, for 47 Hz through 63 Hz
200 to 240 VAC
RMS
, for 47 Hz through 63 Hz
Temperature
25ºC ± 5ºC
Relative Humidity
To 50% at or below 30ºC
Ventilation Requirements
Equipment should be located no closer than 4 cm from the wall in a well
ventilated room.
Installation/Overvoltage Catagory
II
ESD Susceptibility
The following areas can be static sensitive: Screws, seams, toggle switches,
ports and the start/stop switch.
To Next Page
