1.0 Product Introduction |1
1.0 Product Introduction
1.1 Handling Scientifica equipment – precautions
This section contains important safety information related to general use
of the IVM. The Scientifica IVM is a piece of scientific equipment and as
such requires care when handling.
• Before use, carefully read the instructions, including all warnings and
cautions.
• Inspect the product, any cables, and connectors before each use. Do
not use any equipment that appears damaged.
• Do not apply excessive tension to any cable.
• There are no user serviceable parts inside the unit.
• Always disconnect the instrument from the power supply prior to
cleaning the system or performing maintenance work.
Other important safety information appears throughout the manual.
Adjustment or removal of any screws or components
other than those noted in this manual can adversely
affect the performance and operation of your
micromanipulator and may invalidate your warranty.
1.2 The Scientifica IVM
1.2.1 Product overview
The Scientifica In Vivo Micromanipulator (IVM) is a highly stable
micromanipulator system designed for ultra-precise positioning of
stimulating and recording electrodes during in vivo experiments. The
micromanipulator uses high precision stepper motors and anti-backlash
lead screw to achieve extremely fine control of movement. Each axis
stage provides 70 mm travel with 20 nm electronic resolution and 0.1
micron minimum step sizes. Complete with ultra-low electrical noise
control rack and user interface, the IVM incorporates a dovetail clamp to
attach pre-amplifier headstages or other user defined tools.
To Next Page
Loading...
