ScreenTronic CONTROLtronic ST2134 User Manual

ST2134 Operation and Installation Manual
10
4) Press Group add/set button
(cyan flashing LED indicates activation of group learning mode for the selected blind)
5) Operate the graphical blind control in ScreenTronic
®
app or operate a local control switch
connected to ST2134 to link the blind to the control group or the local control switch
(confirmation tone indicates successful adding of the control group or switch to the blind)
6) Configuration for first blind is ready and you can control the blind with the ScreenTronic
®
app
or the local control switch already.
For adding another blind to the same control group repeat step 3) – 5) with next blind.
For a new control group in the ScreenTronic
®
app select menu / edit (pen symbol) / + in the app and
repeat step 3) – 5) for desired blind.
or

ScreenTronic CONTROLtronic ST2134 Specifications

General

Brand	ScreenTronic
Model	CONTROLtronic ST2134
Category	Controller
Language	English