SD Biosensor F200 - System Settings and Customization

30
5th: Supervisor > Settings
1. To set the print option, automatic turn-off time, calibration and QC period,
general settings or instrument name, enter the ‘Settings’ menu. Press ‘Back’
to return to the previous menu.
2. To set the numbers of printed sheet in 1, 2 and auto-printing mode (ON/OFF)
enter the ‘Set Print Option’ menu. Auto-printing means the analyzer allows the
built-in printer to automatically print every test result out at the end of each test.
You can also run a preliminary printing test.