37
Performing a Measurement
Check the following before performing the measurement:
· Is the analyzer connected with AC/DC adaptor?
· Are date and time correct?
· Have you checked the analyzer's setting?
Select the Desired Test Mode
Standard Test Mode may be most convenient for reading a single patient
sample, as the user can standard test during the development period. Read Only
Mode may be most convenient for analysis of large numbers as the analyzer can
quickly read multiple patient samples sequentially.
Standard Test Mode
1. First, select ‘Standard Test’ mode. Refer to assay specic package insert for
collecting specimen for the test and preparing the test procedure.
2. Input operator ID, patient ID, and order #. The operator ID can also be input
with the barcode scanner. If the ID is not input into the analyzer with touching
'Direct', the analyzer will regard the test as that of the guest.
To Next Page
Loading...
Need help?
General