59
Indication Error description
E12: Calibration Overdue
The calibration is overdue.
Solution
If the error continues after turning ON/OFF the
analyzer, please contact SD BIOSENSOR, Inc.
E13: Not Supported Test Device
Loading test device is not proper for the
analyzer.
Solution
Check the type of the test device whether it is
manufactured by SD Biosensor, Inc.
EEE: Internal Error Message for the Analyzer
Internal error has appeared.
Solution
If the error continues after turning ON/OFF the
analyzer, please contact SD BIOSENSOR, Inc.
To Next Page
Loading...
Need help?
General