3
PERIODICAL MAINTENANCE
1) Check the oil level in the hydraulic/oil-bath operators (transparent cap placed in the
Products)
2) Change the oil in case of low level
3) Check the release function
4) Check the fixing screws
5) Check the integrity of the connection cables
6) Check the function and the limit switch condition in opening and closing
7) Check for all corroded parts and replace them
8) Check the robustness and the stability of the gate; particularly the leaning and/or rotation
points of the gate ( hinges)
9) Check the operating of all accessories. Especially the functioning of all safety devices and
reversing sensors
All the above described operations MUST be made exclusively by an
authorized installer.
JOINT
Sistemi Elettronici
di Apertura Porte e Cancelli
®
To Next Page
Loading...
