Seac ACTION - Time and Time Zones

16
Mode
Theoretical average run-time
(years)
Factory Mode 8.4
Watch 3.0
100 dives/year 2.9
200 dives/year 2.7
300 dives/year 2 .1
The data indicated above:
refer to a new battery of recent manufacture (and therefore not subject to
excessive auto-draining).
refer to use at 25°C/77°F.
refer to use that does not entail direct exposure to sunlight.
do not include consumption by backlighting and audible alarms.
Time and Time Zones
The computer can handle two time zones:
Local Time:Time at the user's location.
Home Time:The time at home.
The reference time is always the LOCAL time, and is indicated in the center of
the Watch screen, or in secondary screens during SCUBA/GAUGE/FREE dives.
The Home time can only be changed by editing the value of the “UTC HOME”
time zone in the “SYS SET” menu.
If “UTC LOC” and “UTC HOME” are the same, only one time is shown on the
Watch screen.
If the two parameters do not match, the LOCAL Time is shown in the center of
the screen (the date indicated refers to this Time), while the HOME time is shown
on the lower right.
If the date for each of the two Times is dierent, the date oset from the HOME
Time will be shown on the lower right: “+1 / -1”.