ACTION
43
ACTION SERIAL NUMBER
The Action serial number is engraved on the back of the case and can also
be viewed on the display in the “INFO” function along with the version of the
firmware installed.
CE CERTIFICATION
The Action is compliant with EC Directives.
The EU Declaration of Conformity is available at: www.seacsub.com
CARE AND MAINTENANCE
• Keep your computer clean and dry. Do not expose the computer to chemical
agents, including alcohol. Use only fresh water to clean your computer,
removing all saline deposits. Leave the computer to dry naturally; do not use
jets of hot or cold air. A jet of pressurized air hitting the pressure sensor could
damage it irreparably.
• Do not expose the computer directly to the sun or to sources of heat above
50°C. Store the computer in a cool (5°C - 25°C) and dry place.
• Do not place the computer in a hyperbaric chamber.
The computer is designed for a reading accuracy of +/- 2%. The degree of
accuracy required by the European standards is +/- 3.5%.
European standards require that the unit be checked periodically to monitor the
precision of its depth and time readings.
• The warranty will be forfeited if the computer is opened by an unauthorized
service center.
• The computer is manufactured to withstand use in seawater, but after the dive
you must rinse it thoroughly in fresh water and not expose it to direct sunlight
or sources of heat to dry it.
• Check that there are no signs of humidity inside the display.
• Do not attempt to open, modify, or repair the computer yourself. Always
contact an Authorized Center or SEAC directly.
To Next Page
Loading...
