EasyManua.ls Logo

Seac ACTION - APPLICATION SOFTWARE

Seac ACTION
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ACTION
7
APPLICATION SOFTWARE
Updates: Supported through serial port via USB.
Factory mode: Supported to save energy, can be set by
the user.
Auto Recovery: Automatic reboot if software locks.
Restore: Manual, though combination of buttons\time.
Decompression Algorithm: Buhlmann ZHL-16C for Air/Nitrox.
Levels of conservatism: Yes, based on Gradient Factor.
Mixes Managed: Air/Nitrox, #2 (O
2
maximum 99%).
Dive modes: Scuba, Gauge and Apnea.
Safety Stop: Yes, user-customizable
(depth and duration).
Deep Stop: Yes, based on maximum depth reached.
Water Type: Salt/Fresh.
Alarms: MOD Violation, Ascent Speed, Deco Stop
Violation.
LogBook Sampling: Scuba/Gauge => 5 seconds;
Freediving => 2 seconds.
LogBook Capacity: Capacity approx. 40 hours (Scuba/Gauge
mode) or approx. 18 hours (Freedive mode).
Planner: NDL Aria/Nitrox Calculation.
Stopwatch: START \ STOP \ RESET \ LAP.
Set Backlighting: Auto / Manual / Dive.
Units: Metric / Imperial.
Watch: 24/12 hour format, dual time.
Reset: Tissues/Settings.

Related product manuals