Seaga Quick Break Combo QB218 - Fast Change; Optical Vend; Optics by Row

46QB218 6.1.2019 vers 1.0
5. Press # to save the seng
Free Vend (New Seng)
*-Exit 4-Edit
6. Press * three mes to exit 0.00
FAST CHANGE
Enables the vending machine to give change immediately aer the customer makes a selecon. If Fast
Change is ON, it overrides the Mul Vend feature.
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2. Press 5 for Opons Menu Opons
3. Press 5 for Fast Change Menu
Fast Change (Current Seng)
*-Exit 5-Edit
4. Press 5 to toggle between ON and OFF
Fast Change (Choice Flashing)
*-Exit #-Save
5. Press # to save the seng
Fast Change (New Seng)
*-Exit 5-Edit
6. Press * three mes to exit 0.00
OPTICAL VEND
Not applicable. This sub-menu provides the operator with opons for designang product items or
rows that are monitored for product delivery by an opcal sensor. All items should be set to OFF.
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2. Press 5 for Opons Menu Opons
3. Press 6 for Opcal Vend Menu Opcal Vend
4. Press 3 for All Items Menu
All Items (Current Seng)
*-Exit 3-Edit
5. Press 3 to toggle between ON and OFF
All Items (Choice Flashing)
*-Exit #-Save
6. Press # to save the seng
All Items (New Seng)
*-Exit 3-Edit
7. Press * four mes to exit 0.00
OPTICS BY ROW
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2. Press 5 for Opons Menu Opons
3. Press 6 for Opcal Vend Menu Opcal Vend
4. Press 2 for to enter a Row
Row: --
*-Exit
5. Enter the Row
Row: X (Current Seng)
*-Exit 1-Edit