Seaga Quick Break Combo QB218 - Optics by Selection; Point of Sale Message (POS)

47QB218 6.1.2019 vers 1.0
6. Press 1 to toggle between ON and OFF
Row: X (Choice Flashing)
*-Exit #-Save
7. Press # to save the seng
Row: X (New Seng)
*-Exit 1-Edit
8. Repeat Steps 4 through 7 unl all desired rows are completed.
9.
Press * to enter another Row or four mes to
exit
0.00
OPTICS BY SELECTION
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2. Press 5 for Opons Menu Opons
3. Press 6 for Opcal Vend Menu Opcal Vend
4. Press 1 for to enter the Selecon
Item: --
*-Exit
5. Enter the Item Number
Item: XXX (Current Seng)
*-Exit 1-Edit
6. Press 1 to toggle between ON and OFF
Item: XXX (Choice Flashing)
*-Exit #-Save
7. Press # to save the seng
Item: XXX (New Seng)
*-Exit 1-Edit
8. Repeat Steps 4 through 7 unl all desired rows are completed.
9.
Press * to enter another Selecon or four
mes to exit
0.00
POINT OF SALE MESSAGE (POS)
Turns ON or OFF the default scrolling display message.
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2. Press 5 for Opons Menu Opons
3. Press 7 for POS Menu
POS Message (Current Seng)
*-Exit 7-Edit
4. Press 7 to toggle between ON and OFF
POS Message (Choice Flashing)
*-Exit #-Save
5. Press # to save the seng
POS Message (New Seng)
*-Exit 7-Edit
6. Press * three mes to exit 0.00