Seaga Quick Break Combo QB218 - Pair Motors

60QB218 6.1.2019 vers 1.0
17. Press 6 two mes for Stop Time menu Stop Time
18.
Press 6, then enter Stop Time in 24-hr me
(HH:MM)
New Time
*-Exit #-Save
19. Press # to save the me
New Time
*-Exit 6-Edit
20. Press * to return to Interval1 menu Interval1
21.
Press 7 to enter Storage Temp (default is 62°
F)
Storage (Current Temp) F
*-Exit 7-Edit
22. Press 7 to set Storage Temp (36° F to 62° F)
Storage (Choice Flashing) F
*-Exit #-Save
23. Press # to save the seng
Storage (New Temp) F
*-Exit 7-Edit
24. Press * once to return to Interval1 Menu Interval1
25. Press 8 for Lighng menu
Lighng (Current Seng)
*-Exit 8-Edit
26.
Press 8 to toggle Lighng ON/OFF
Lighng ON turns o lights during Energy
Saving interval
Lighng OFF leaves lights on during Energy
Saving interval
Lighng (Choice Flashing)
* -Exit 8-Edit
27. Press # to save the seng
Lighng (New Seng)
*-Exit 8-Edit
28. Press * ve mes to exit to Sales Mode 0.00
PAIR
Not applicable. No motors should be paired.
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2.
Press 6 for Password (Advanced Features)
Menu
Password
3. Enter Password (default 2314) Advanced Features
4. Press 7 for Pair menu
Pair - - -
*-Exit
5. Enter the rst motor number
Pair 013 to ---
*-Exit #-Add
6. Press # and enter the 2nd motor number
Pair 013 to 015
*-Exit #-Save
7.
Press * two mes to add another pair of
motors or
Pair - - -
*-Exit #-Save
8. Press * ve mes to exit to Sales Mode 0.00