www.seagullmodels.com
15
WHEEL AND WHEEL PANTS.
! 2) Follow diagram below for wheel pant
installation:
! 1) Assemble and mounting the wheel pants
as shown in the following pictures.
Wheel Collar.
Axle.
Wheel.
Nut.
Wheel Pant.
Landing Gear.
Nut.
Plywood Washer.
14mm.
7mm.
! 3) You have to trim each axles and using a
tool cutting and cut-off wheel.
Caution when cutting the axles wear
protective goggles.
57mm.
Plywood Washer.
To Next Page
Loading...
