Seagull Models PC-9 - Engine and Fuel System Installation; Engine Mount Installation

www.seagullmodels.com
5
ELEVATOR CONTROL HORN.
Install the elevator control horn using the
same method as with the aileron control
horns.
2 sets.
3x45mm.
2 sets.
3x50mm.
Elevator control horn.
Rudder control horn:
Using the same tectniques used aileron control
horn. See picture below.
RUDDER CONTROL HORN.
Rudder control horn.
ENGINE MOUNT INSTALLATION.
see pictures below.Make yourself the
template of your engine on paper.
Aluminum Washer.
CONTRONL HORN M3
M3 LOCK NUT.
Epoxy.
Aluminum Washer.
Horizontal
stabilizer
Elevator
CONTRONL HORN
M3 SCREW.
ALUMINUM WASHER.
ALUMINUM WASHER.
M3 LOCK NUT.
EPOXY.
FUSELAGE
Rudder
18mm.
EPOXY.
Fuselage.
Rudder.
Horizontal
Stabilizer.
18mm.
EPOXY.
Elevator.