Seagull Models Ultimate - Installing the Main Landing Gear

www.seagullmodels.com
11
! 3) You have to trim each axles and using a
tool cutting and cut-off wheel.
Caution when cutting the axles wear
protective goggles.
57mm.
! 4) A drop of C/A glue on the wheel collar
screws will help keep them from coming lose
during operation.
Repeat the process for the other wheel.
lite-plywood block.
Landing
gear.
!1) The blind nuts for securing the landing
gear are already mounted inside the fuselage.
!2) Using the hardware provided, mount the
main landing gear to the fuselage.
INSTALLING THE MAIN LANDING GEAR.
Plywood Washer.
6 X 20mm.