Seagull Models ZERO MS:123 - Page 23

23
www.seagullmodels.com
8) Install the gear door to the retract strut.
Apply a thin epoxy to the two gear door brack-
ets to secure the gear door to the retract strut
as shown.
5.
8.
Epoxy.
7.
6.
4.
Epoxy.
Adjustable Servo
connector.
Servo arm.
Loctite secure.
1 PCS.
Epoxy.
SERVO GEAR 4.5KG (35X16X30MM).