SEAL 62Base - Specifications; Identification; Machine Dimensions

Specifications 3
English
3 Specifications
3.1 Identification
The machine identification label (example in Figure 4) is located at the bottom of the right-hand
cabinet, on the rear side of the machine. This label indicates the model (version) and the rated
power of the machine.
CAUTION: THE POWER SUPPLY MUST BE ABLE TO PROVIDE THE RATED POWER
ACCORDING TO THE ELECTRICAL CODE REQUIREMENTS FOR THE AREA OF
INSTALLATION. CONSULT YOUR LOCAL ELECTRICIAN FOR THE POWER SUPPLY
REQUIREMENTS.
Figure 4: Machine identification label (example).
3.2 Machine dimensions
Uncrated:
Metric
American
Model Type
54
62
Unit
54
62
Unit
Width
190.5
207.5
cm
75
81.7
in.
Height
130.8
130.8
cm
51.5
51.5
in.
Depth (excl. table)
47
47
cm
18.5
18.5
in.
Depth (incl. in-feed table)
63.5
63.5
cm
25
25
in.
Working height
90
90
cm
35.4
35.4
in.
Weight
232
252
kg
512
556.3
lbs
Crated:
Width
221.7
221.7
cm
87.3
87.3
in.
Height
155
155
cm
61
61
in.
Depth
90
90
cm
35.4
35.4
in.
Weight
270
293.4
kg
595
646.5
lbs
Working area:
Width
342
358.5
cm
135
141.5
in.
Depth
190 cm (75 in.) + 2x maximum board length
Note: A relative humidity between 50% and 70% helps reducing ESD build-up.