Warranty and Safety instructions 3
5.1.2 Additional controls 10
5.2 Operating modes 11
5.2.1 Normal mode 11
5.2.2 Slow mode 11
5.3 Placing film rolls 12
5.3.1 Auto-grip shafts 12
5.3.2 Loading shaft with film rolls 13
5.4 Webbing 14
5.4.1 Release liner and splitter bars 14
5.4.2 Using the upper section only 14
5.4.3 Upper and lower section 15
5.4.4 Presetting the tension 16
5.4.5 Pressure setting 16
5.5 Processes and settings 17
5.5.1 Mounting images or decals 17
5.5.2 Pre-coating panels 18
5.5.3 Over-lamination 18
5.5.4 Single-sided lamination 18
5.5.5 Decaling 19
5.6 Unloading 19
6 Maintenance 20
6.1 Cleaning 20
6.1.1 Cleaning the silicone covered rollers. 20
6.2 Preventive maintenance 21
6.2.1 Auto-grip shafts 21
6.3 Troubleshooting 21
6.4 Technical assistance 22
7 Process Control Sheet 23
8 Glossary 24
1 Warranty and Safety instructions
1.1 Warranty
The warranty period and conditions stated in this chapter are merely a summary of the general
SEAL® warranty conditions.
For the exact details on the warranty period and conditions for your machine, please contact your
dealer.
To Next Page
Loading...
