Page 1
Original Language Version
VS8220 Issue: 2(SP) - 23/09/13
INSTRUCTIONS FOR:
PROSCOPE 1 DIGITAL
BORESCOPE Ø8.5mm
MODEL No. VS8220
Table of Contents
1. Safety Instructions .................................................................................2
1.1. Work Area Safety ......................................................................................2
1.2. Electrical Safety ........................................................................................2
1.3. Personal Safety ........................................................................................2
1.4. Battery Safety ........................................................................................... 2
1.5. Operating Safety.......................................................................................3
2. Description, Specications and Tool Components ............................. 4
2.1. Description................................................................................................4
2.2. Specications ...........................................................................................4
2.3. Accessories Included ................................................................................ 5
2.4. Tool Components and Ports .....................................................................5
2.5. Buttons and Controls ................................................................................ 6
3. Installation and Connection ..................................................................7
3.1. Battery Removal and Installation ..............................................................7
3.2. Imager Head and Cable Installation .........................................................8
3.3. Accessories Installation ............................................................................8
3.4. Micro SD Card Installation ........................................................................9
3.5. USB Cable Connection.............................................................................9
3.6. Video-out Cable Connection……………………………...... .......................10
4. Operation .................................................................................................10
4.1. Basic Operation ........................................................................................ 10
4.2. Pre-Use Inspection ................................................................................... 11
4.3. Tool and Work Area Preparation ...............................................................11
4.4. Maintenance ............................................................................................. 12
4.5. On Screen Navigation ..............................................................................12
4.6. Icons ......................................................................................................... 19
4.7. Software Updates ..................................................................................... 19
5. Troubleshooting .....................................................................................20
Declaration of Conformity .....................................................................21
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these
instructions and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL
INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
© Jack Sealey Limited 2012
To Next Page
Need help?
General
