Page 21
Original Language Version
VS8220 Issue: 2(SP) - 23/09/13
© Jack Sealey Limited 2012
EC DECLARATION
OF CONFORMITY
We the sole importers into the UK, hereby declare that the equipment described below
Description and Function: ..................................................................................................................................................
Model/Type: .......................................................................................................................................................................
Manufacturing Date / Serial number (optional): .................................................................................................................
Manufacturer's authorised representative within the EC: Jack Sealey Ltd. Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk, IP32 7AR
Conforms to the requirements of the following Directives, as indicated.
2006/42/EC Machinery Directive 2000/14/EC Outdoor Noise Emissions Directive
2006/95/EC Low Voltage Directive 2002/96/EC WEEE Directive
2004/108/EC EMC Directive 2002/95/EC RoHS Directive
93/68/EEC CE Marking Directive 97/23/EC Pressure Equipment Directive
And the following harmonised standard(s)
……………………………………………………………………………………………….......................................................
……………………………………………………………………………………………….......................................................
……………………………………………………………………………………………….......................................................
.........................................................................................................................................................................................
………………………............................................………
........................................................................................................................................................................................
Technical file compiled by: Jack Sealey Ltd.
Signed:……………………………………..
Date:………………………………............. Place: Bury St.Edmunds.
Name:…………………………………………
Position:…………………………………....
Being the responsible person appointed by the manufacturer.
Additional technical standards and specifications (if applicable):
2009/105/EC the Simple Pressure
Vessels Directive
ProScope 1 Digital Borescope Ø8.5mm
BS EN 55022: 2006 + A1: 2007
BS EN 55024: 1998 + A1: 2003
BS EN 61000 part: 4-2: 2009
BS EN 61000 part 4-3: 206 + A1: 2008
To Previous Page
Loading...
